english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
tiếng Việt
ไทย
Matériel multi anticorrosion de but d'Uns N04400 de bande d'alliage de nickel
Monel 400 Strip Nickel Alloy Strip Price Chemical Element: Ni 63.0min, Cu 28min~34max, Fe2.5max, Mn 2.0max, C 0.3max, Si 0.5max, S 0.024max Characteristic as below: Monel 400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric acid and fluoride gas medium with excellent corrosion resistance, as well as to the hot concentrated alkali. At the same time, is also corrosion resistant to neutral Read More
Alliage de nickel de Monel de 400 BARRES avec la résistance à la corrosion à hautes températures
Monel 400 BAR 1.Introduction Monel 400 is a kind of corrosion resistant alloy with the largest dosage, the most extensive use and the best comprehensive performance.This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium and good corrosion resistance to hot concentrated alkali liquor.It is also resistant to corrosion of neutral solutions, water, sea water, atmosphere and organic compounds.One of the important characteristics of the alloy is Read More
Fil de l'alliage de nickel d'Uns N05500 Monel 500 avec la résistance à la corrosion exceptionnelle
Monel 500 WIRE Descripition: MONEL®alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni 3 (Ti, Al) are precipitated throughout the matrix. The thermal processing Read More
Résistance d'eau de mer de vitesse élevée d'alliage de nickel de Monel de 500 barres excellente
Monel 500 bar Descripition: Monel K-500 is a nickel-copper alloy which combines the excellent corrosion resistance of Monel 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly Read More
Bande supérieure de l'alliage de nickel de Monel de force 500 pour l'industrie électrique
Monel 500 strip Monel K500 material is a nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater Read More
Représentation parfaite de coupe Monel de nickel d'ASTM de TUYAU standard de l'alliage 400
Monel 400 PIPE Monel 400 UNS Trademark W.Nr N04400 Monel400 2.4360 Monel 400 Chemical composition Alloy % Ni Cu Fe C Mn Si S Monel400 Min. Bal 28 Max. 34 2.5 0.3 2 0.5 0.024 Monel 400 Physical properties Density 8.83 g/cm³ Melting point 1300-1390 °C Minimum mechanical properties in the room temperature Alloy state Tensile strength Rm N/mm² Yield strength RP0.2 N/mm² Elongation A 5 % Monel400 480 170 35 Monel 400 Characteristic Monel 400 is an extremely combination property Read More
Tuyau laminé à chaud de Monel K500, alliage cuivre-nickel avec la dureté élevée
Monel 500 pipe Key Specifications/Special Features: A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to temperatures as low as (-101°C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers,springs, valve trim, fasteners, and marine propeller shafts. Chemical composition Ni : 63.0 min Si: 0.50 max Cu : 27-33 Read More
Feuille de Monel K500 d'alliage de cuivre de nickel, résistance à la traction de l'alliage de nickel N05500 1100
Monel 500 sheet Monel K500 material is a nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater Read More
